A soldering iron has many uses. It is a key tool in electronic manufacturing and is used to solder various electronic components such as resistors, capacitors, transistors, etc. to build circuits. In the maintenance of electronic equipment, it is also commonly used to repair or replace damaged components.
When using a soldering iron, you must first choose the appropriate tip type and temperature. Then, place the solder wire on the area to be soldered and heat it with a soldering iron tip to melt the solder and infiltrate the component pins and circuit board. During use, please pay attention to the following points:
1. Avoid the soldering iron tip contacting the solder joint for a long time to avoid overheating and damaging the components.
2. Pay attention to safety and avoid burns.
3. Clean the soldering iron tip regularly to maintain good welding results.
4. Turn off the power in time after use to avoid wasting energy and causing safety hazards.
The features of our soldering irons are as follows(for example DX99 Electric Soldering Iron)
-Compatible with C245 series soldering iron tips, temperature adjustable range 50℃-500℃/122℉-932℉.
- Working power supply: support PD2.0/3.0, QC2.0/3.0, PPS, DC Max 21V.
-Intelligent temperature control algorithm, supports temperature compensation and temperature self-calibration.
-The shell is made of industrial special materials, which is extremely resistant to high temperature and has effective anti-static treatment.
-128*32 OLED display, built-in buzzer for work reminder.
- Sensitivity can be set to reject interference from environmental factors.
-Support ℃/℉ switch, left and right hand screen flip, firmware upgrade.
